How to
All you need to know on how to mix, apply and use our high quality products.
Table of Contents
Tacktile Gypsum Skimming Plaster
If you’re wondering how to mix Tacktile Gypsum Skimming Plaster, then you’ve come to the right place! With the correct information and technique, mixing Tacktile Gypsum Skimming Plaster can be simple but mixing it to the correct consistency is hugely important for getting the best results.
Step 1
Step 2
Slowly add 10kg Tacktile Gypsum Skimming Plaster while mixing.
Step 3
Step 4
Step-by-Step Video Guide
Tacktile Jointing Plaster
If you’re wondering how to mix and apply Tacktile Jointing Plaster, then you’ve come to the right place! With the correct information and technique, mixing Tacktile Jointing plaster is easy.
Step 1
Step 2
Slowly add 10kg Tacktile Jointing Plaster while mixing.
Step 3
Step 4
Fill Joint with Jointing plaster caused by taper of board.
Step 5
Apply Jointing tape over filled Joint.
Step 6
Apply a coat of Jointing Plaster over tape and allow to dry.
Step 6
Apply a second coat to overlap the first coat.
Step 7
Notes:
- Corner Joints two Coats are recommended while straight Joints 3 coats are recommended.
- Ensure any imperfections are sanded flat.
- To prevent any colour differentiation when painting it is recommended to seal the joint and board with Tacktile Universal Sealer.
Step-by-Step Video Guide
Tacktile Bonding Liquid
If you’re wondering how to mix and apply Tacktile Bonding Liquid, then you’ve come to the right place! With the correct information and technique, application of Tacktile Bonding Liquid is easy.
Step 1
Use a wire brush to remove loose particles.
Step 2
Rinse surface.
Step 3
Apply with a brush or roller. Allow to dry.
Step 4
Plaster as normal.
Step-by-Step Video Guide
Tacktile Self Levelling Screed
Step 1
Gradually add Tacktile Self Levelling Screed cold water.
Step 2
Mix to a creamy lump-free slurry consistency.
Step 3
Pour the Tacktile Self Levelling Screed onto the floor.
Step 4
Use an extended trowel or spiked roller to work into floor.
